welch allyn caretemp touch free thermometer
Welch Allyn CareTemp Touch Free Thermometer



Buy Now

Welch Allyn CareTemp Touch Free Thermometer


Features of the Welch Allyn CareTemp Touch Free Thermometer

  • Infrared sensor reads temperature 4-6 cm from the center of forehead
  • 60 second pulse timer, memory recall button, C/F scale conversion button
  • No patient skin contact required, helps minimize the risk of cross-contamination
  • Measurement feedback system detects proper operating distance for accuracy
  • Large, backlit LCD display that’s intuitive and easy to read
  • Takes approximately 3,000 readings on two AAA batteries
  • 2 year device warranty

Request for Quote
(Orders above 20 units)

Buy Now

Categories: ,


In fast paced environments where speed and efficiency matter, the CareTemp Touch Free thermometer is a valuable screening tool for many clinical settings. It features an infrared sensor that reads temperature from center of forehead with no patient skin contact required, supporting a safe and comfortable patient experience and minimizing the risk of cross-contamination. A measurement distance feedback system helps provide consistent accuracy and features such as a 60 second pulse timer, memory recall button, and C/F conversion button enhance staff productivity.


  1. What things can affect the readings on a CareTemp Thermometer?
    If the eyebrow area is covered with hair, sweat or dirt, clean the area and wait 10 minutes before taking a measurement. Refer to the Directions for Use manual for a more complete list.
  2. How do I take a patient measurement with the CareTemp thermometer?
    Press and release Measure button to power on the thermometer. Position the thermometer between 4 and 6 cm from the center of the patient’s forehead, and aim between the eyebrows. Press and release Measure button a second time to start reading. Slowly move the device toward or further away from the forehead. The arrow on the display flashes until the correct distance is achieved. When the correct distance is reached the LED bar will illuminate, three beeps sound, and the measurement is displayed.
  3. How do I change the scale setting on my Welch Allyn CareTemp from Fahrenheit to Celsius?
    When the device is off, press and hold both the Mem and C/F buttons simultaneously for 3 seconds to change the default scale. Three beeps sound to confirm the setting is changed.


Information taken from Welch Allyn website.

Additional information


Welch Allyn