cas envision sars cov 2 antigen rapid detection kit
CAS-Envision SARS-CoV-2 Antigen Rapid Detection Kit

RM6.50

RM6.50

Buy Now

CAS-Envision SARS-CoV-2 Antigen Rapid Detection Kit

RM6.50

Product Specification

  • Test time: 15 minutes
  • Sensitivity:
  • Specificity:
  • Accuracy:
  • Sample type: Nasal Swab & Saliva
  • Storage Condition: 2ºc to 30 ºc
  • Catalog: CG201A

Request for Quote
(Orders above 100 units)

Buy Now

SKU: CG201A Category: Tags: ,

Description

CAS-Envision SARS-CoV-2 Antigen Rapid Detection Kit is a colloidal gold immunochromatography intended for the qualitative detection of nucleocapsid antigens from SARS-CoV-2 in human nasal vestibule swab or oral cavity and saliva swab specimen. It does not rely on professional equipment, nor does it require the operator to receive professional training. Just follow the product instruction manual to complete the rapid qualitative test of Novel Coronavirus.

The SARS-CoV-2 detection kit uses colloidal gold immunochromatography for qualitative detection of nucleocapsid antigen of SARS-CoV-2 in human nasal vestibular swabs or oral and salivary swabs.It does not rely on professional equipment, nor does it require the operator to receive professional training. Just follow the product instruction manual to complete the rapid qualitative test of Novel Coronavirus.However, it should be noted that due to technical limitations, accidental factors during the production, storage and transportation of the product, as well as uncertainties such as the operator’s operation method, the test can only provide preliminary test results and cannot be used as the sole basis for disease treatment or other health management decisions.The positive results indicate the presence of viral antigens, but do not rule out bacterial infection or co-infection with other viruses.Negative results also do not rule out SARS-CoV-2 infection. Users should take into account their recent contact with a confirmed patient and any clinical signs or symptoms consistent with COVID-19, and visit their local health care provider for a more professional diagnosis if necessary.

What’s in the CAS-Envision Covid Test Kit

  1. Packing Box
  2. Qualification Certificate
  3. Instructions for Use
  4. Test Cassette
  5. Sterile Swab
  6. Extraction Solution

CAS-Envision SARS-CoV-2 Antigen Rapid Detection Kit Product Usage Video (Opens in new tab)

Instruction to use the CAS-Envision Covid19 Rapid Test Kit

For Nasal Swab

  1. Carefully insert swab into your nostril 2-4cm until resistance is encountered.
  2. Roll the swab against the nasal mucus and wipe it back and forth 5 times to ensure that enough sample is collected.
  3. Use the same swab to collect the sample from the other nostril the same way.
  4. Tear off the sealing film of the tube. Insert the swab with the collected specimen into the sample extraction tube. Let the extraction solution submerge past the swab head.
  5. Squeeze and stir the swab head at least 5 times. Soak for more than 1 minute to release the sample.
  6. Remove the swab head from the extraction solution to close to the edge of the extraction tube and squeeze the swab head as much as possible to dry it.
  7. Place dripper firmly over the sample extraction tube.
  8. Take out the test cassette from the foiled pouch by tearing it at the notch and placing it on a level surface.
  9. Drip 4 drops of the extraction solution into the sample well of the test cassette and start the timer.
  10. Wait for 15 minutes and read the results. Results after less than 15 minutes or more than 30 minutes are invalid.

For Oral / Saliva Swab

  1. Do not put anything in your mouth 10-minutes before the sampling is collected
  2. Rub the swab five times along both sides of the inner wall of the mouth upper jaw and on the surface of the tongue to collect as much saliva as possible form the mouth.
  3. Tear off the sealing film of the tube. Insert the swab with the collected specimen into the sample extraction tube. Let the extraction solution submerge past the swab head.
  4. Squeeze and stir the swab head at least 5 times. Soak for more than 1 minute to release the sample.
  5. Remove the swab head from the extraction solution to close to the edge of the extraction tube and squeeze the swab head as much as possible to dry it.
  6. Place dripper firmly over the sample extraction tube.
  7. Take out the test cassette from the foiled pouch by tearing it at the notch and placing it on a level surface.
  8. Drip 4 drops of the extraction solution into the sample well of the test cassette and start the timer.
  9. Wait for 15 minutes and read the results. Results after less than 15 minutes or more than 30 minutes are invalid.

How to Interpret the result of the Sejoy Covid-19 Saliva Home Test Kit

Invalid: If control line C does not display color, this test result will be invalid. Please read the instructions for use carefully and test again.
Positive: When the purplish red bands appear on both control line C and test line T, the subject is likely to be infected with SARS-CoV-2. When the number of viruses is relatively small, the color of the test line T will be lighter, you must carefully observe in full light condition.
Negative: Only the control line C showed a purplish red band, while the test line T showed no color at all, indicating that the possibility of the subject being infected with SARS-CoV-2 is low.

 

*Information taken from CAS-Envision Website.

Additional information

Brand

CAS-Envision